Osmo
Sale

Stone and Terracotta Oil 620 (click here for the content)

€32,95
€45,00

Osmo Stone and Terracotta Oil 620, Natural Oil impregnation for natural and artificial stone. Ideal for protecting surfaces made of natural stone, artificial stone and terracotta. Colorless, natural Oil penetrates the surface and does not form a film on t

  • Speciale olie voor alle soorten steen buiten
Not immediately available
Quantity
- +
  • Ordered before 18:00:00, delivered tomorrow
  • Altijd de laagste prijs (Minimaal 35% korting op de winkelprijs)
  • Kies zelf uw verzendwijze zoals Spoed, Avond, Servicepunt etc.
  • Achteraf betalen na 30 dagen met Afterpay
  • More information? Contact us about this product
Product description

Osmo Stone and Terracotta Oil 620,

Natural Oil impregnation for natural and artificial stone. Ideal for protecting surfaces made of natural stone, artificial stone and terracotta. Colorless, natural Oil penetrates the surface and does not form a film on the surface. The impregnation of the Stone and Terracotta Oil makes the surface water and dirt repellent and stain resistant . Dust from screeds and concrete surfaces is greatly reduced.

The Osmo Stone and Terracotta Oil is suitable for the colorless finish of natural stone with a polished, sanded or crushed surface. It is also intended for artificial stone in outdoor areas. The product is especially suitable for stone floors and windowsills made of granite as well as limestone and slate.

note

Oils enhance the natural color of the surface (permanent wet look). Making a test is absolutely necessary, because the Oil reacts differently on every surface. White or very light colored surfaces may turn slightly yellow as a result of the oil treatment. The acid sensitivity of the stone (eg marble) remains unaffected. Non-absorbent surfaces, such as glass, glazed tiles or ceramics, cannot be treated (impregnated). Substrates that are sensitive to solvents (eg plastics such as Plexiglas) must be protected.

Available sizes: 0.75L and 2.5L

1L is approximately sufficient for 24m2 with one layer.

Benefits Osmo Stone and Terracotta Oil

  • Ideal for protecting surfaces such as; natural stone, artificial stone and terracotta
  • Provides transparent protection
  • The surface becomes water and dirt repellent
  • Dust from screeds and concrete surfaces is greatly reduced

Thoroughly clean the concrete beforehand, ensure that the concrete, tiles, brick etc. is completely clean and free of dust. You may also clean it well with this special cleaner.

1. Apply the product thinly with the Brushes below, or Microfibre Roller, and spread it out well (rather an extra layer than too thick a layer)

2. Remove excess product after 20 minutes with the Cotton cloths or the Easy Pads Wipers

3. The liquid oil must be absorbed into the surface. No oil should remain on the surface.

4. Allow 8-10 hours to dry. Ventilate well while drying.

5. Apply the second coat thinly as well. Remove the excess product again.

6 . When renovating already oiled surfaces, one coat on a cleaned surface is normally sufficient.

Product information
Brand Osmo
Article code 14485
What our customers say

average of 0 review(s)

No reviews found
Read or write a review
Osmostore.nl
My account
You are not logged in. Log in to make use of all the benefits. Or create an account now.
Language
Cart
Your cart is empty
Menu
Search
Search suggestions
No products found...