Osmo hard wax oil on color (Farbig) 3040,3041 etc ACTION !! Osmo light colored hard wax oil for a bright light colored looking surface. Based on natural vegetable oils and waxes with a so-called open pore structure. This makes it possible to ...
Osmo hard wax oil on color (Farbig) 3040,3041 etc ACTION !!
Osmo Hardwax-Oil farbig in different color variants, for individual creativity!
Osmo light colored hard wax oil for a bright light colored looking surface. Based on natural vegetable oils and waxes with a so-called open pore structure. This allows the wood to continue to breathe and will therefore not crack, flake or peel.
Transparent silk mat, for inside
Specially recommended for wood and cork floors; also suitable for furniture and laminated surfaces
Osmo Hardwax Oil in color is dirt and water repellent, durable and gives a pleasant surface. A uniform color is achieved by the vegetable ingredients
Number of layers: apply a thin colored surface thinly in the direction of the wood grain and spread it well. In the case of untreated wood, max. 2 layers.
After drying, apply a top layer with a colorless Osmo Hard wax oil 3032 or 3062 (always 2 to 3 layers on the 3041)
Osmo Hardwax Oil on color is available in 0.75 2.5 and 25 liters
Only Wit 3040 and Natural 3041 are available in a 0.125 liter test jar.
1 liter is sufficient for approximately 20 m 2 with 1 layer
Drying time approx. 24 hours.
TIP: ENSURE THE BEST RESULT WITH THE SPECIAL PAINT ROLL THAT BELOWS THAT. Always finish this series with 1 or 2 layers of transparent hard wax 3032 or 3062 (always two layers with pines, fires, etc.).
ATTENTION new colors available such as great beautiful color Black / Silver! view the technical information file below.
PS Do you want a White Wash floor? then you use the 3040 in 1 layer and you finish it with 1 layer 3032 or 3062 that gives you a nice white haze over the floor.
And here is an example of the new 3041 Natural, do not pay attention to the language instructions, it is purely about the appearance of the product and the method of application.
An example of the 3041,
Here an example of the difference between the colorless 3032 and 3062 etc, and these colors from the Farbig series, (note that each color here must always be finished with at least 1 layer of 3032 or 3062).