Osmo

Transparent Wood Finish 000

Sale
€31,95
€45,00
(inclusief btw)

Osmo Transparent Wood Finish 000 is a colorless silk matt wood treatment based on a natural oil base for all your wood outdoors. The Transparent Wood Finish is porous, it allows the wood to breathe and reduces swelling and shrinkage

  • Kleurloze bescherming voor al uw buitenhout
In stock
Delivery next day from 8.00 o'clock
Quantity
- +
  • Ordered before 18:00:00, delivered tomorrow
  • Altijd de laagste prijs (Minimaal 35% korting op de winkelprijs)
  • Kies zelf uw verzendwijze zoals Spoed, Avond, Servicepunt etc.
  • Achteraf betalen na 30 dagen met Afterpay
  • More information? Contact us about this product
Product description

Osmo Transparent Wood Finish 000 (click for content)

Advantages,

  • Finishing layer is resistant to mold, algae and fungus formation
  • Based on natural vegetable oils
  • Makes the wood surface smoother
  • Colorless protection for all your outdoor wood
  • Can be used as a first layer or as a top layer over another Osmo color oil or stain

The Osmo Transparent Wood Finish 000 is a colorless silk matt wood treatment based on a natural oil base for all your wood outdoors. The Transparent Wood Finish is porous, it allows the wood to breathe and reduces swelling and shrinkage. The wood finish is water-resistant, will not crack, flake or peel. The Transparent Wood Finish 000 penetrates deep into the wood and makes the wood surface smoother, even with a single coat. Applying a Primer is not necessary.

The Osmo Transparent Wood Finish 000 can be used as a first layer but also as a top layer. It is always recommended to use the product in combination with an Osmo outdoor product with a color pigment. This ensures extremely good protection against UV radiation, etc. The Osmo Transparent Wood Finish is completely colorless (so no yellow glow) and therefore offers no protection against UV radiation. After drying, the finish is completely safe for humans, animals and plants (saliva and perspiration according to DIN 53160, suitable for children's toys according to EN 71.3).

Available sizes: 0.75 liters and 2.5 liters
1 liter is sufficient for about 16 m2 with one layer

Note : Raw, old wood or wood that has been left untreated outside often absorbs more oil, so more oil is needed than normal. With new wood, it is recommended to let the wood weather for a few weeks first. This ensures that the wood is more resistant to the outdoor climate. After weathering, the wood can be treated with our Osmo Houtonggrijzer .

Tip : always purchase a little more product than for the recommended square meters. You can always maintain and update the surface annually with this Osmo oil.

Note: For surfaces that have already been treated with Osmo or with another brand or product, a test should always be made first. When renovating, the advice is always to apply a maximum of one layer.

Important : Cloths, brushes and rollers, etc. used to apply this oil must be rinsed well with water as there is always a risk of spontaneous combustion. Therefore, always rinse it well with water before throwing it away, after it has dried, everything can go with normal household waste.

  • Also available in 25 Ltr, PLEASE NOTE larger quantity must be ordered, delivery time +/- 2 weeks.
  • Always apply with the special paint roller or brushes that you see below, that gives the best result.

For more information, see the tech info file below or email us.

  • content options,
  • 0.75 liter
  • 2.5 liters
  • 25 liters (on order)

Instructions,

  1. The wood surface must be clean, dry and frost-free (maximum 20% moisture content). Old layers of oil, paint, etc. must first be removed, for example with the Osmo Paint Remover gel..
  2. Clean all gray or weathered wood with Osmo Power-Gel if necessary, but in any case remove dirt and loose fibers and algae, etc.
  3. Stir well, at least 2 minutes.
  4. As a primer: apply with the special brushes or paint roller below in the direction of the wood grain and roll out/brushes well. Let it dry for 10 to 12 hours. And then finish with one of the other Osmo products.
    As a glossy finish: apply to the first pigmented layer with the special brushes below or paint roller in the direction of the wood grain and roll out / brush well. Let it dry for 10 to 12 hours.
  5. As a transparent finish: Work according to the above and apply 2 layers to the bare wood with the same paint roller or brush that you see below, note wood will gray slightly but this can be solved with the Osmo Power gel with every maintenance.
Product information
Brand Osmo
Article code 14623
What our customers say

average of 0 review(s)

No reviews found
Read or write a review
My account
You are not logged in. Log in to make use of all the benefits. Or create an account now.
Language
Cart
Your cart is empty
Menu
Search
Search suggestions
No products found...