Osmo Wood oil 2K (type 6100 Matt) content 1 ltr,
For heavily frequented wooden floors and parquet
Solvent-free 2-component component. Extremely durable and wear-resistant. Very water and dirt repellent.
Commercial use specific - high traffic areas
Suitable for all types of wood, including exotic woods
Resistant to common spills such as water, juice, tea, cola and wine Saliva resistant and sweat resistant,
Suitable for children's toys. Microporous, breathable finish that will not crack, flake or chip. No sanding required for spot repairs or future applications.
Application tool: The Special paint listed below or the Osmo Floor Brush, Pad Holder Osmo or followed by white pad
Recommended use: Interior and wooden floors and parquet
Overcoating: One coat, when signs of use become visible Sizes 375ml, 1L
Drying time 24 hours
Cleaning Osmo Brush Cleaner
Coverage 40-50m²/L with one coat
Osmo 2K Wood Oil is not ready for use. Just before application, add the hardener (mixing ratio 100:12 vol.-%) and mix both components thoroughly. Do not dilute. Pot life is approx. 3-4 hours. Wood surface must be clean, sanded, dry and frost-free (moisture content max. 20%). Thoroughly clean old microporous stains. Old paints, varnishes and lacquers must be completely removed. Always wear a dust mask when sanding. Fill small cracks, larger joints or holes in wood (Osmo Wood Filler or Osmo Wood Putty 7350). Sand wooden surfaces gently. Start with coarse sandpaper – final sanding for floors P 120-150, for furniture P 220-240. Before oiling the surface, remove sanding dust with a broom or vacuum cleaner.
The finished surface is affected by several factors, including the condition of the wood. Therefore, a trial application is always necessary, especially for unfamiliar surfaces.
Method of application,
Apply 2K Wood Oil thinly with Osmo Double Blade Scraper or in a comfortable standing position with Osmo Professional Scraper. On bevelled floors, apply 2K Wood Oil thinly in parts with Osmo Microfibre Roller, without filling the joints. Wait approx. 20-40 minutes for the oil to penetrate into the wood. Then scrub oil into wood and smooth the surface with a single disc machine and a red or beige pad (or ideally on furniture with the small pads 150mm). Let the surface dry. Note: If the single disc machine leaves streaks due to too much product, we recommend that you turn the pad over or replace it. In order to prevent any pressure build-up in the container, allow oil and hardener mixtures to act completely (approx. 12-16 h) before closing.
2K Wood Oil can only be used with the hardener that has been developed for it. Any leftover mixed product cannot be used after the pot life has expired and must be disposed of properly. Wooden surfaces treated with 2K Wood Oil are easy to maintain. Remove coarse dirt with a broom or a vacuum cleaner. For cleaning, add Eco Multi Cleaner to the mop water and clean the surface with a damp (not too wet!) mop. If necessary, use Osmo Maintenance Wax to refresh well. If more shine is desired, after thorough drying, apply Osmo Maintenance Wax thinly and polish with a white pad after drying.